Title

Home
Articles Search
oil filter

Articles search results for oil filter

Showing 1 to 20 of 31 articles

If you have the engine tag still attached to the engine - just in front/below the thermostat housing - or perhaps the original engine number in the log book then the following should help you determine which engine you have. For Metro units, see 'Engine - Metro identification data'. Original engine identification numbers 850cc 8A Austin up to 25000 8MB Morris up to 25000 8AM Austin & Morris 25000 onwards 8AH Austin & Morris Automatic 8AJ Austin & Morris closed circuit breathing 8AK Austin & Morris automatic with closed circuit breathing 8WR Wolseley Hornet & Riley Elf 8AC Moke 85H/101 All variants 1969 onwards Note: third suffix letter denotes compression type, L = Low, H = High, e.g. 8AM/U/H101 denotes high compression. 998cc 9WR Wolseley Hornet & Riley Elf Mk2, pre closed circuit breathing 9AD Austin, Wolseley Hornet & Riley Elf Mk2 with remote type gearbox and closed

Engine - Running in Procedure

This is another of those subjects that crops up on the message board frequently. I am constantly surprised by the number of engine builders - or people who charge other folk for building engines at any rate - that never hand out such an information sheet. It seems pretty daft to me that having taken a wad of money off of a customer for an engine you've lovingly put together, you'd want to help that person get the very best out of the engine. And the running/breaking in procedure is absolutely crucial. It at least ensures no damage is incurred when the engine first bursts into life. A collection of the usual suspects have explained their own methods on the board, along with various others - many of which probably work just as well for them, a few which are down-right dubious. Following is a sheet I administer with every customer engine I build.

Air filtration - K&N Air cleaner test.

In the forefront of Mini tuning, improving the over-all breathing capability of the very asthmatic A-series the air filter set-up is one that sees priority attention. All the widely available (and widely varying) stage one tuning kits include at the very least a replacement - and hopefully - high-flow air filter element to fit into the standard plastic case,

In the past few years (well, must be nearly 6 years by now!) since I got involved with writing for the specialist Mini Magazines I have been continually fighting with the problem of limited space. This has limited what I have been able to cover, both in subjects and in details. Up until recently (say the past year or so) I have been covering fairly broad topics in a fairly broad terms and detail. Basically trying to cover perhaps the most popular areas dabbled in by the Mini owning masses.

DIY enthusiasts often believe that building an engine to give excellent all-round road performance is beyond them. Mainly from comparisons made between what they have been able to achieve and what specialists say should be achievable from any particular type of engine build.

Generally scrambled further by the non-perfect match of parts and components used between aforementioned specialist and erstwhile DIY-er, and the ritual 'nose-tapping and knowing winks' display of those specialists. Something you can very nearly 'see' even when talking to such folk on the phone - or that inimitable 'ah, yes, well…' So some form of 'black art' is implied. Whilst there is most definitely a degree of 'feel' involved between the real specialist's results and those of just a good engineer - the bones of the deal is subject to no such thing and is certainly within the capability of the DIY enthusiast given the necessary information. And that has been the problem.

Engine - Identification data

RUNNING IN NEW ENGINES

Install engine. It is absolutely imperative that the cooling system is more than sufficient to deal with any temperatures likely to be produced by the engine. More power means more heat to be dissipated. A standard radiator is very unlikely to be able to cope with a reasonable power increase over standard.

Do not fill cooling system yet. Set clutch throw-out and free-play take up. Double-check all connections electrical, oil, fuel and cooling system. Put in engine oil – use a cheap multi-grade mineral oil. DO NOT use either semi or full synthetic oils. They will stop the rings from bedding in. Remove spark plugs, and spin engine over in bursts of a few seconds to pick up oil pressure and prevent starter motor damage. DO NOT start engine until oil pressure picks up.

Once oil pressure is showing, check ignition timing statically. Set to figure advised by distributor maker, or if no figures available, set at around 6-8 degrees BTDC. Re-fit spark plugs a

Contrary to popular mis-guidance, all BBUs will fit all four-syncro gearboxes. It was only the three-syncro boxes that varied in casting dimensions causing hassles where 1275s were applied to 850/998 gearbox casings.

Terminology -
BBU - Big Bore Unit (1275cc based engines)
SBU - Small Bore Unit (850/998/1098cc based units)
FD - Final Drive

NOTE: This information is largely for transplanting large-bore engine units into small-bore engined Minis. For further information on up-grading transfer (drop) gears, refer to relevant separate article.

Terminology -
BBU - Big Bore Unit (1275cc based engines)
SBU - Small Bore Unit (850/998/1098cc based units)
FD - Final Drive

The fuel situation seems to be worsening at a great pace these days. And as is exhibited by the questions that appear on the message board many folk are confused by what they can and can't do, and what is best to do as far as race engines go.

Many have posted (particularly from the States) that nothing need be done - just run on unleaded. They've been doing this for years and never had any problems. I have trouble believing that in the face of what I know and have investigated - so here's what the score really is.

Years ago this stuff called Tetraethyl lead was originally conceived as an octane enhancer. It was soon discovered, however, that the metallic oxides produced by the combustion process formed a protective coating on the valves and seats. This coating prevented micro welding of the valve seat to the corresponding seat in the head under high temperature operation.

2003-08, Oil gallery plugs

Here's something unusual that cropped up a little while ago that I've never commented on before - main oil gallery plugs/bungs.

I'd been conversing via e-mail with a guy that was experiencing weird oil flow/supply problems with his performance street engine. Initially he'd been blaming it on the supposedly superior oil pump he'd bought. He sent it to me; I inspected it and found it to be in perfect health with no signs of causing the issues in hand. Firstly there was a claimed total oil drain down from the pump causing lack of initial supply on start-up for a few seconds, and then repeated crank bearing failures when used in anger (i.e. at high rpm for protracted periods). Unless there is something drastically wrong with the oil pump and fitment - cracked pump body, non-flat mounting surface, mounting bolts too long, split gasket, etc. - it will not drain down simply because the inlet and outlet ports are above the centerline, near the top of the pump as it is mounted to the block.

Lubrication - Oil, what it does and how

It's criminal. Folk spend fortunes putting together super-sonic motors, only to skimp on the oil they use. Why? Oil's oil right? Wrong. Even if it's a standard engine, it deserves TLC considering it's extremely hostile working environment.

Oil is literally the engine's life-blood. The opening few sentences are astonishingly true. Oil isn't there just to prevent all metal components within an engine fusing together in the first few seconds of running, creating a total melt down of Chernobyl proportions. It's an intricate blending of chemicals to protect the engine as a whole.

The most commonly uttered statement about engine wear is most wear occurs within the first 10 minutes from start up when cold. True if cheap chip fat oil is used.In performance and race engines, a considerable amount of wear is created by heat, load, speed, and pressure. Again, cheapy oil won't give protection here.

Lubrication - Temperature critical

The correct running temperature of the oil is perhaps even more important than the water/coolant temperatures - so let us consider how to control them.

Mainly because it seems to be the most misunderstood of the whole process, and oil cooler fitment almost a reflex when over-heating occurs where a tuned engine of any type is concerned. And in many cases on standard production road cars for that matter.

Almost since the appearance of the immortal Cooper S, fitting an oil cooler has been the essential thing to do to any tuned Mini without any comprehension why. The original fitment was necessary because oil and bearing technology wasn't too advanced. Asking an oil of yester-year to cope with lubricating an engine at racing speeds, and a gearbox pushed their performance to the edge of their all too narrow capability, so extreme control over their working environment was essential for reliability. Hence oil cooler fitment.

Oil pressure loss caused by oil surge can be experienced under hard cornering. To alleviate this it is essential to fit a centre oil pick-up pipe.Mini Spares' continual research and development program has seen advances in pick-up pipe design, replacing the original ancient design conceived by Abingdon ST some thirty-plus years ago.

FITTING INSTRUCTIONS

Mini oil pumps are susceptible to premature failure caused by excessive large particle contamination of the oil, mainly metallic debris created by the gearbox. The situation is not helped by the oil getting to the pump before being filtered. Mini Spares has developed components to help minimise this problem, including these in line magnetic oil traps. Their design allows easy fitment, as the adapter simply replaces the standard oil pick up pipe blanking plate on the back of the gearbox. It’s position in the oil supply gallery necessitates frequent removal of the trap to clean collected particles out, more so for the filtered version. Failure to do this will cause premature failure of the pump and possibly engine bearings.

There are no hard and fast rules for this periodic maintenance as vehicle usage will determine debris build up. Obviously a carefully driven road car will not need as frequent attention as a race car. Certainly clean it at e...

C-AHT54 Centre oil pick-up pipe.

Since the inception of the newer design of this essential component, literally hundreds, if not thousands, have been sold and used. Some folks have been suspicious of the filter gauze, believing it to be too fine and therefore restrictive in flow.

Others have questioned the 360 degree, straight cut-off end, suggesting it may cause ...

Mini Production dates

We have tried to get together as complete list as possible to show all the models made from 1985 onwards, hopefully this will help identify those cars that have been modified over the years. If you have any information that you know is correct or anything that you think is not right please let us know.

This large plastic shield was Rovers last attempt to cover the engine electrics on all minis except for MPI cars 1996 on. It might need slight modifications by narrowing for some SPI cars but they have been fitted to many cars without any problems.

Me & My Moke

About six years ago I bought a small bungalow in the province of Catalunya Spain close to the French border. After a year or so my next door neighbour told me that in his garage was a Californian Mini Moke that he had owned since 1982.

Monte Carlo Rally 2015 - Overview.

Our Mini Spares/Millers Oil Team were well equipped to embark on the gruelling 2,000 miles event across France and the French Alps. Our start point was at Reims.
The Mini PRX had to complete an arduous shake down called the ‘’Concentration Run, “ this is an 800 Mile drive with virtually NO stopping other than to refuel, with the addition of a special stage ZR1 at the end.

The front brakes are standard Cooper 'S' 71/2" variety with the standard drums on the rear, with the assistance of a servo the rear regulator valve has been left out of the system and the brakes work very well. As the weight of the second engine amounts to the equivalent of two 11 1/2 stone passengers. Rear cooling is taken care of using a 1300 radiator mounted in the standard position. The heater take offs are connected to a 19 row oil cooler.

Articles search results for oil filter

Contact Mini Spares

Store Details:

Classic Mini Brochure & Manuals